English
Basic Features
■
Black Tone (Off / Dark / Darker / Darkest)
: Select the
black level to adjust the screen depth.
■
Dynamic Contrast (Off / Low / Medium / High)
: Adjust
the screen contrast.
■
Gamma
: Adjust the primary color intensity.
■
Expert Pattern (Off / Pattern1 / Pattern2)
: By
running the
Expert Pattern
function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the
Picture
menu is opened, the calibration is
saved and the
Expert Pattern
window disappears.
Off
: Turns the
Expert Pattern
function off.
Pattern1
: This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2
: This is a test screen designed to demonstrate
the affects of display settings on colors.
✎
After selecting
Pattern1
or
Pattern2
, you can
adjust any of the advanced settings to the desired
effect.
✎
While the
Expert Pattern
is running, sound is not
output.
✎
Only enabled in Component and HDMI modes.
■
RGB Only Mode (Off / Red / Green / Blue)
: Displays
the
Red, Green
and
Blue
color for making fine
adjustments to the hue and saturation.
■
Color Space (Auto / Native / Custom)
: Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue
and
Reset
, set
Color Space
to
Custom
.
■
White Balance
: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset
: Adjust each color’s (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain
: Adjust each color’s (red,
green, blue) brightness.
Reset
: Resets the
White Balance
to it’s default settings.
■
10p White Balance (Off / On)
: Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
✎
Available when the picture mode is set to
Movie
and when the external input is set to all input.
✎
Some external devices may not support this
function.
Interval
: Select interval to adjust.
Red
: Adjust the red level.
Green
: Adjust the green level.
Blue
: Adjust the blue level.
Reset
: Resets the
10p White Balance
to its default
settings.
■
Flesh Tone
: Emphasize pink “Flesh Tone.”
■
Edge Enhancement (Off / On)
: Emphasize object
boundaries.
■
xvYCC (Off / On)
: Setting the
xvYCC
mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
Movie
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
Picture Options
MENU
Picture
Picture Options
ENTER
✎
In PC mode, you can only make changes to the
Color
Tone, Size
and
Screen Burn Protection
.
■
Color Tone (Cool / Normal / Warm1 / Warm2)
✎
Warm1
or
Warm2
will be deactivated when the picture
mode is
Dynamic
or
Standard
.
✎
Settings can be adjusted and stored for each external
device connected to an input on the TV.
■
Size
: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.
16:9
: Sets the picture to 16:9 wide
mode.
Zoom1
: Use for moderate magnification.
Zoom2
: Use for a stronger magnification.
Wide Fit
: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎
Available with HD 1080i / 720p signals in 16:9
mode.
4:3
: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit
: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
P.SIZE
!Z
^F
$x
^^{
9K Q
^%
:[>K Q
^%
/9:;=\| X
^F
QF:
^_``
$\ =% \
:X
[
%
wj[`WTjiu]_TWZXX[iTWWsWYUGGGX]
YWXWTW^TWYGGG㝘䟸GXaWZaYZ
