Samsung PN50C450B1DXZC, Service Manual, Page: 49 / 73

Samsung Electronics 4-13
Troubleshooting
4-2-2 How to Access Service Mode
1. General Remote
To Enter :
POWER OFF MUTE POWER ON 1 8 2
(Interval between key strokes: less than 3 sec)
To Exit :
POWER OFF POWER ON
2. Adjustment Procedures
- Channel ▲▼ Key : Select an item.
- Volume
◀▶
Key : Adjust the value up or down.
- MENU Key : Save the changes to the EEPROM and return to the higher-level mode.
- Using the Numeric (0~9) keys, you can select a channel.
- Using the SOURCE key, you can switch AV modes.
3. Initial SERVICE MODE DISPLAY State
※
The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to
change for the improvement of product functions.
※
If you have adjusted the settings in Service Mode, you have to reset the product.
Option
ADC/WB
Control
Advanced
T-SAT4AUSHC-XXXX
DTP-LP-XXXX-XX
DTP-LP-App-XXXX-XX
OPTION : 00100 10
ADC : HDMI 0 COMP 0 PC 0 AV 0
EDID : SUCCESS
HDCP : SUCCESS
Current Flash : Flash 0
Build Date : XX-XX-XXXX
Date Of Purchase : XX/XX/XXXX