Samsung P408 User Manual Download Page 10

Page: 10 / 96

Power Related

The power plug and wall outlet figures may differ depending on the country specifications

and the product model.

Do not touch the main plug

or power cord with wet

hands.

There is a danger of electric

shock.

Do not exceed the standard

capacity (voltage/current)

of a multiplug or power

outlet extension when

using it for the product.

There is a danger of electric

shock or fire hazard.

If the power cord or power

outlet makes a noise,

disconnect the power cord

from the wall outlet and

contact a service center.

There is a danger of electric

shock or fire hazard.

Do not use a damaged or

loose main plug or power

cord or power outlet.

There is a danger of electric

shock or fire hazard.

Plug the power cord firmly

into the power outlet and

AC adapter.

Failing to do so may cause

fire hazard.

Do not unplug the power

cord out by pulling the

cable only.

If the cord is damaged, it

may cause electric shock.

Do not bend the power cord

excessively or do not place

a heavy object over the

power cord. It is especially

important to keep the power

cord out of reach of infants

and pets.

If the cord is damaged, it

may cause electric shock

or fire.

Summary of Contents for P408

































































































Search results

Summary of Contents for P408

Reviews:

Related manuals for P408

Brands by name

Popular brands

Samsung P408, User Manual

Search results

Summary of Contents for P408

Reviews:

Related manuals for P408

Brands by name

Popular brands