Samsung P408 User Manual Download Page 7

Page: 7 / 96

Before You Start

Before reading the User Guide, first check the following information.

Safety Precaution Notations

Icon

Notation

Description

Warning

Failing to follow instructions marked with this symbol, may

cause personal injury and or fatality.

Caution

Failing to follow instructions marked with this symbol, may

cause slight injury to yourself or damage your property.

Text Notations

Icon

Notation

Description

Before You Start

Content included in this section includes information

required before using a function.

Caution

Content included in this section includes information

required about the function.

Note

Content included in this section includes helpful information

to use the function.

Copyright

Samsung Electronics Co., Ltd. 2009

Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, without the consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without notice due to improving the

performance of the product.
Samsung Electronics shall not be liable for any data loss. Please take care to avoid losing any

important data and backup your data to prevent any such data loss.

Summary of Contents for P408

































































































Search results

Summary of Contents for P408

Reviews:

Related manuals for P408

Brands by name

Popular brands

Samsung P408, User Manual

Search results

Summary of Contents for P408

Reviews:

Related manuals for P408

Brands by name

Popular brands