14
9. Assemble and Disassemble
1. ASSí Y-COVER TOP
1) Remove two screws fixing the top-cover to back side.
2) Push the top-cover back about 15mm and pull it up.
3) It's possible to exchange and service the trans
former, the pressure-senser, the noise-filter and
the water valve.
2. FRAME FRONT
1) Remove the top-cover and the assí y drawer.
2) Remove two screws fixing the control-panel to
front side and the screw on right side.
3) Remove the cover-front(L) by using the (-)driver.
4) Pull the lever and open the assí y-door.
5) Part the diaphragm and the wire diaphragm
away from the frame-front.
6) Remove the eight screws fixing the frame-front.
7) Ití s possible to exchange and service the heater,
the pump, the shock-absorber and the door lock
s/w.
15m
m
SCREW
LEVER
Summary of Contents for P1091GW1/YLP
Page 4: ...3 2 Overview of the Washing Machine ...
Page 12: ...11 8 PCB Schematic Diagram ...
Page 13: ...8 PCB CIRCUIT DIAGRAM ...
