OH85N/(LH85OHNSKGB/**)
1 x N one-side unit design
When designing the 1 x N one-side enclosure unit, add partitions between the products to keep the air paths separated.
–
Refer to the 'Total open area of the ventilation holes and ratio’. (Page 13)
–
Make sure there is no gap between the partitions and the enclosure unit.
Product 2
Partition
Partition
Product 1
Product 3
Double-sided design
–
Double-sided design is not supported.
To add devices such as a media player
If installing other devices such as a media player, use partitions to make sure they are installed separately from the
product.
–
Heat from other devices can increase the temperature inside the enclosure unit and cause a malfunction, which will
not be covered by the warranty.
–
Design to make sure there is no gap around the partitions due to cable connections.
–
The guide for OH85N/(LH85OHNSKGB/**) only applies when the product is used with an enclosure unit that has a
protective glass added to the front side.
English - 15
Summary of Contents for OHN Series
Page 5: ...KGB OH85N LH85OHNSKGB...
Page 24: ...OH85N D K LH85OHNDKGB...
Page 40: ...OH85N LH85OHNSLGB...
