Samsung OfficeServ ITP-5121D User Manual Download Page 35

Page: 35 / 94

PRIVACY RELEASE

This feature will allow another station to join in our conversation by releasing pri-
vacy on the C.O. from your phone.

To Release Privacy:

While you are talking on a C.O. line and you wish to have other internal parties (or
up to three) join the conversation.

•

Press the

PRB

button (the

PRB

button will light steady red). Inform the other

party that he/she may now join the conversation.

After the other party (or parties) has joined the conversation and you wish to
return privacy to the line so that no one else can join the conversation, press the

PRB

button a second time, the

PRB

button will be off.

To Join a Non-Private Conversation:

When someone has informed you that you can join a conversation:

•

Press the

C.O. line

button that he/she has indicated.

•

Dial the

C.O. line number

that he/she has indicated.

5121d_keyset.qxp 5/9/2006 10:47 AM Page 34

Summary of Contents for OfficeServ ITP-5121D































































































Search results

Summary of Contents for OfficeServ ITP-5121D

Reviews:

Related manuals for OfficeServ ITP-5121D

Brands by name

Popular brands

Samsung OfficeServ ITP-5121D, User Manual

Search results

Summary of Contents for OfficeServ ITP-5121D

Reviews:

Related manuals for OfficeServ ITP-5121D

Brands by name

Popular brands