16
OUTSIDE CALLS
MAKING AN OUTSIDE CALL
•
Lift the handset and press an idle outside line button, line group button or dial
a line access code to receive dial tone—
OR
—press an idle outside line button,
line group button or dial a line access code to receive dial tone through the
speaker—
OR
—press
SPEAKER
, receive intercom dial tone and dial a line
access code.
•
Dial the telephone number.
•
Finish the call by replacing the handset or pressing the
END
button.
NOTE: You will receive No More Calls tone when you attempt to make a call and
there is no button available for that line.
•
If Least Cost Routing is enabled on your phone system, this button may be
labeled
LCR
or accessed by dialing an access code (usually
9
).
•
If your system is programmed to require an authorization code before making
a call, dial
plus a valid code before selecting a C.O. line.
•
If your system is programmed to require an account code before making a
call, press the
ACC
button or dial
47
plus a valid bin number, press the
ACC
button again and then select a C.O. line.
See Account Codes for more information.
For more information on authorization and account codes, see your system
administrator.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
ANSWERING AN OUTSIDE CALL
•
Lift the handset and you are automatically connected to the ringing call.
See
Ring Preference under Customizing Your Keyset
—
OR
—press the
SEND
but-
ton to automatically answer on the speakerphone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the flash-
ing button to answer.
UNIVERSAL ANSWER
Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial
67
or press the
UA
button. This device can operate in
any one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before dialing.
5121d_keyset.qxp 5/9/2006 10:47 AM Page 22
