Samsung OFFICESERV ITP-5014D User Manual Download Page 88

Page: 88 / 127

Page 99

CONVENIENT FEATURES

Returning Messages

Press the

[Message]

button to review

the stations that have left messages

and press the Soft button associated

with

[Dial]

on the LCD screen to call

the station. Or, dial

[4] [3]

and the first

station that left its number will be rung

automatically.

The LED on your

[Message]

button and

status indicator will remain flashing until

the station responds.

Repeat the above steps to respond to all

station messages received.

The LED on your

[Message]

button and

status indicator will go off when all

messages are returned or cancelled.

- You can view the numbers left and return messages in any order through the LCD screen.
- If a message was left at your IP phone by a station in Auto Answer mode, you must cancel

the message manually, after returning the message.

NOTE

Summary of Contents for OFFICESERV ITP-5014D
































































































































Search results

Summary of Contents for OFFICESERV ITP-5014D

Reviews:

Related manuals for OFFICESERV ITP-5014D

Brands by name

Popular brands

Samsung OFFICESERV ITP-5014D, User Manual

Search results

Summary of Contents for OFFICESERV ITP-5014D

Reviews:

Related manuals for OFFICESERV ITP-5014D

Brands by name

Popular brands