Samsung NX58M9960PS/AA, User Manual, Page: 31 / 132

English 31
Maint
enanc
e
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven. To turn off the self-cleaning cycle, turn both the mode and temperature
selector knobs to the
OFF
position. The cycle turns off, but the door remains locked
until the oven temperature falls below 400 °F (205 °C).
After self-cleaning
• The door stays locked until the internal oven temperature falls below 400 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to
remove ash residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the self-cleaning cycle.
• Self-cleaning does not operate within 2 hours after running the self-cleaning
cycle.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.
Replacing the oven lights
Oven lights (2 locations)
The oven lights are standard 40-watt appliance bulbs. They come on when you
open the oven door. To replace an oven light:
1. Turn off the oven.
2. Make sure the oven and oven light are
cool.
3. Open the door, and remove the glass
cover by turning it counterclockwise.
4. Remove the oven light from the socket
by turning it counterclockwise.
5. Insert a new 40-watt appliance bulb
into the socket, and then turn it
clockwise to tighten.
6. Reinsert the glass cover, and then turn
it clockwise to tighten.
CAUTION
To prevent electric shock, make sure the gas oven is turned off and cool before
replacing the oven light.
NOTE
• The oven lights do not operate during a self-cleaning cycle.
• Remove the racks if they prevent you from accessing an oven light.
NX9000K_CHEF_NX58M9960PS_AA_DG68-01008A-06_EN.indd 31 2019-02-27 2:26:22