84 Users Manual
Q11 <Fn>+<F4 / LCD/CRT> keys does not operate.
A
When you are playing video file such as a video CD, an MPEG file, or a DVD,
when no external display is connected, or when you are using the extended
desktop mode or full screen DOS mode, you cannot change display devices.
Q12 When I played a DVD or a video CD in dual display clone or extended
desktop mode, actions such as changing the display setting or adjusting the
volume operates slowly.
A
Playing a DVD or a video CD requires additional data processing. In dual display
clone or extended desktop mode, data volume involved in this process exceeds
the volume the video chip can handle simultaneously, causing a problem.Change
the display device to display through either one, the LCD or the external display
device.
Q13 When the computer enters standby mode or hibernate mode, screen of a
connected TV is broken for a short time.
A
This problem may occur in some wide screen TVs. After a short time, the TV
turns off properly.
Q14 When I restarted the computer from hibernate mode, the screen is not
displayed properly.
A
This problem may occur when the TV is set to primary display device, and the
CRT to secondary. Change the display device differently. (Refer to ”Using
External Display Devices” (p 60).)
Q15 When I connected and used a projector, the screen is broken for a short
time.
A
When you use DOS mode with some projectors, this problem may occur while
changing the video mode. The screen is displayed properly after a short time.
Q16 When I set the extended desktop to display through both LCD and TV and
restarted the computer, the setting is changed to dual display mode.
A
Set to extended desktop again on [Graphics Controller Properties] dialog. (Refer
to ”Using External Display Devices” (p 60).)
