Samsung NX-308, Programming & Installation Manual

Page: 34 / 54

32
4. Display shows extension number followed by three digits indicating allow or deny status for
each line.*
5. Enter 0 or 1 for each line.
One digit must be entered for each of the three C.O. lines:
0 = Deny
1 = Allow
6. Press

key.
(* Default: 111 for all stations.)
# 32 Internal Paging
Allows or denies receipt of an internal page for stations.
1. Press

key.
PROGRAMMING is displayed.
2. Dial 32.
Display shows ENABLE ALL CALLS followed by eight digits indicating allow or deny
status for each station.*
3. Enter 0 or 1 for all eight stations.
0 = Deny
1 = Allow
4. Press

key.
(*Default: 1 (allow) for all stations.)
# 33 Deny Codes for Class of Service B
Defines what leading digits in a dialling plan are to be restricted. There are 10 line entries (0-9) which
define up to 12 digits per entry.
1. Press

key.
PROGRAMMING is displayed.
2. Dial 33.
Display shows DENY IN CLASS B.
3. Enter 0 - 9 to select line entry.
‘
BD x
’
is displayed, where x is line entry 0 - 9.
4. Enter up to 12 digits to be restricted.
5. Press

key.
(Press HOLD key to clear entry and enter new data.)