Samsung NX-308, Programming & Installation Manual

Page: 33 / 54

31
2. Dial 26.
NIGHT TOLL is displayed and then the current data indicating class of dialling.
3. Enter technician-level password.
4. Enter digit.
0 = Same as day mode operation
1 = All stations class B
2 = All stations class C
3 = All stations class D
4 = All stations class E
5. Press

key.
(Default: 0)
# 30 Class Of Service
Assigns an individual dialling class of service to each station.
1. Press

key.
PROGRAMMING is displayed.
2. Dial 30.
Display shows STATION TOLL CALL followed by eight digits, each of which indicates the
class of service of each station.*
0 = Class A: No Restriction
1 = Class B: Follows allow/deny table for class B
(programs

33, # 34)
Deny table has a priority over allow table
2 = Class C: Follows another allow/deny table for class C
(programs

35, # 36)
3 = Class D: Follows allow table for class D
(program

37)
4 = Class E: Intercom call only
3. Enter all eight digits to set class of service for each station.
4. Press

key.
(*Default: All Class A

00000000)
# 31 C.O. Line Access
Designates which stations have access to C.O. lines on a station by station basis.
1. Press

key
PROGRAMMING is displayed.
2. Dial 31.
TRUNK ACCESS is displayed.
3. Press DSS key of station to be programmed.