Samsung NX-24B Operating Manual Download

Page: 7 / 64

GENERAL INFORMATION

Liquid Crystal Display
(LCD)

It shows date, time, umber
dialed and other useful call
information.

16 Programmable Buttons
with RED Light

Used to call stations directly, to
indicate busy conditions of ther
stations, for one touch dialing
and many other system features.

8 Programmable Buttons with
Dual Colored Light

Used for intercom calls, outside lines
and many other system features.

Pullout Directory tray

Microphone

For hands-free operation.

Function Keys and Indicators

Used to access the most commonly
used features. The indicator light or
flickers to indicate the feature in use.

Volume Control Buttons

Used to set independent levels for
handset, speaker, background
music, ring and page volumes.

Speaker

For hands-free operation and ringing.

Keyset Layout

NX-24E

euro_oper 99.3.25 11:27 AM

∆

‰¿Ã¡ˆ1

Summary of Contents for NX-24B

































































Search results

Summary of Contents for NX-24B

Reviews:

Related manuals for NX-24B

Brands by name

Popular brands

Samsung NX-24B, Operating Manual

Search results

Summary of Contents for NX-24B

Reviews:

Related manuals for NX-24B

Brands by name

Popular brands