38
4. Troubleshooting
This document can not be used without Samsung’s authorization.
4-1 Failure Display Codes
"C-d1"
* Replace micro switch or Lock motor.
No
* Disconnect power.
* Disconnect harness connected to Lock motor
* Check micro switch
(com-NC=>closed, when door is unlocked.)
* Measure resistance of Lock motor
Coil.(1750~1850Ω at the room temperature)
* Check oven sensor
(See page 29)
*Check if voltage is present at the lock motor terminals
allowing it to operate.
Ok
Ok
No
No
* Repair damaged harness or
replace
*Check whether harness connected normally into CN201
of main PCB.
*Measure resistance of Cn201 on Main PCB.
(COM-NO: ∞ at the room temperature)
*COM : black color
*NO : yellow color
No
* Replace main PCB.
* re-solder damaged paths or
broken contacts .
END
END
New FM PCB
Wall Main PCB
CN201
