69
_ maintaining your appliance
Cleaning sugary spills and melted plastic
1
. Turn off all surface units. Remove hot pans.
2
. Wearing an oven mitt, use a single-edge razor-blade scraper to move the spill to a cool area of
the cooktop. Remove the spill with paper towels.
3
. Any remaining spillover should be left until the surface of the cooktop has cooled.
4
. Don’t use the surface units again until all of the residue has been completely removed.
If pitting or indentations in the glass surface have already occurred, the cooktop glass will
have to be replaced. In this case, service will be necessary.
REMOVING AND REPLACING THE OVEN DOOR
How to remove the door
CAUTION
• The door is very heavy. Be careful when removing and lifting the door. Do not lift the
door by the handle.
• Turn the power OFF before removing the door.
1
. Open the door completely.
2
. Pull the hinge locks down toward the door frame to the unlocked position.
Hinge lock
Locked position
Unlocked position
3
. Firmly grasp both sides of the door at the top.
4
. Close the door to the door removal position, which is approximately 5 degrees from vertical
(Fig. 1).
5
. Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
about 5 °
Fig. 1
Fig. 2
130513_(IB_Best)NE58F9710WS_DG68-00506A_EN.indd 69
13/05/2013 08:27:17