33
_ surface cooking
Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
1
5
2
3
4
6
1
1. Left Front:
7”, 1,800 W
(Bridge 2,600 W)
2. Left Rear:
7”, 1,800 W
3. Right Front:
6”/9”/12”, 3,000 W
4. Right Rear:
6”, 1,200 W
5. Warming Center:
100 W
6. Hot surface indicator
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.
Cooking areas
• The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
•
Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking surface.
The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section “Using the
proper cookware” on page 36.
130513_(IB_Best)NE58F9710WS_DG68-00506A_EN.indd 33
13/05/2013 08:26:58
