39
Using "PCoIP"
2
2 Using "PCoIP"
z
When you make a change to one of the settings on this page, you must reboot your device for the
change to take effect.
Figure 2-4:
IPv6
Configuration
z
Enable IPv6
Enable this field to enable IPv6 for your PCoIP devices.
z
Link Local Address
This field is automatically populated.
z
Gateway
Enter the gateway address.
z
Enable DHCPv6
Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
z
Primary DNS
The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated
by the DHCPv6 server.
z
Secondary DNS
The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
z
Domain Name
The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.
z
FQDN
The fully qualified domain name for the host or client. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
