Samsung N148 User Manual Download Page 65

Page: 65 / 84

BIOS Setup

The BIOS Setup enables you to configure your computer hardware according to your

needs.

Before You Start!



Use the BIOS setup to define a boot password, change the booting priority, or add a

new device.

Since incorrect settings may cause your system to malfunction or crash, take care

when configuring the BIOS.



The functions of the BIOS setup are subject to change for product function

enhancement purposes.

The BIOS Setup menus and items may differ depending on your computer model.

Entering the BIOS Setup

Turn the computer on.

When the booting screen (SAMSUNG logo) appears, press the

key to enter the BIOS

Setup.

Press the

F12

key while the booting screen(SAMSUNG logo) appears, the system will

try to boot from the network.

After a moment, the BIOS setup screen appears.

The items in the BIOS setup may differ depending on the product.

Summary of Contents for N148





















































































Search results

Summary of Contents for N148

Reviews:

Related manuals for N148

Brands by name

Popular brands

Samsung N148, User Manual

Search results

Summary of Contents for N148

Reviews:

Related manuals for N148

Brands by name

Popular brands