27
3.3 DOS-based Firmware
Update Utility Basics
The “Samsung Solid State Drive (SSD) Firmware Update Utility”
(hereinafter called Firmware Utility) enables users to update the firmware
on specific Samsung SSD’s connected to the computer.
This Firmware Utility supports only the Samsung 470 Series and 830
Series SSDs and should be used with the Samsung SSD Magician
software to minimize user interaction when downloading and updating the
firmware.
Samsung may provide new firmware in order to improve SSD
performance, compatibility, or user experience. A firmware update is
recommended whenever the latest firmware version is released.
Creating a Boot Disk for the Firmware
Update
1. If you have not already done so, install the Samsung SSD Magician
software.
2. Run the Samsung SSD Magician software. The Samsung SSD
Magician software should be installed in the “All Programs” section of
the Start Menu.
Summary of Contents for MZ-7PC128N
