Samsung MXD-K100XN, Installation Manual

Page: 25 / 36

25 English
Installation
Ɗʪϩϩ̈͝˝ɇ̈͝͝ʒͱͱθЇ̈͝ϩ̈͝ϑϩɇ̷̷ɇϩ̈ͱ͝ͱΧϩ̈ͱ࣍͝ϑЇ̈ϩɇɵ̷ʪ˙ͱθϩ˵ʪʀͱ͝ʒ̈ϩ̈ͱ͝ͱ˙ʪɇʀ˵̈͝ϑϩɇ̷̷ɇϩ̈ͱ̷͝ͱʀɇϩ̈ͱ࣎͝
1. Check whether power is supplied or not.
ঽ
When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The reception part of a remote controller is built in the AHU KIT PBA.
3. Set the installation option according to the installation condition of an air conditioner.
ঽ
The default setting of an indoor unit installation option is “020000-100000-200000-300000
4. Set the indoor unit option by wireless remote controller.
ۖ
02 series installation option
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 - Exterior temperature sensor Central control -
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 - Hot water heater Use of Heater
Controller variables
for auxiliary heater
-
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 External control External control output - Buzzer -
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3 - - - - -
॰
When setting the option other than above SEG values, the option will be set as “0”.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE -
Use of external
Temperature sensor
Use of central control -
Indication and
Details
Indication Details Indication Details
-
Indication Details Indication Details
-
0 2
0 Disuse 0 Disuse
1 Use 1 Use