ENG - 25
08 TROUBLESHOOTING
Before seeking assistance, check the following.
The unit will not turn on.
;
The battery may be fully discharged.
Please connect the power plug and try to
turn it on
A function does not work when the button is
pressed.
;
After removing the power plug, turn off the
Sound Tower. And insert power plug again,
turn on the Sound Tower.
;
Power cycle the external device and try
again.
;
If there is no signal, the Sound Tower
automatically turns off after a certain
period of time. Turn on the power.
Sound dropouts occur in BT mode.
;
See the Bluetooth connection sections on
page 13.
Sound is not produced.
Is the Mute function on?
;
Press the
(Mute)
button to cancel the
mute function.
Is the volume set to minimum?
;
Adjust the Volume.
The remote control does not work.
Are the batteries drained?
;
Replace them with new batteries.
Is the distance between the remote control
and Sound Tower main unit too far?
;
Move the remote control closer to the
Sound Tower main unit.
Stereo Group connection is not working.
Is the system in wireless Group Play mode?
;
Disconnect the wireless Group Play mode
and try Stereo Group connection again.
It cannot make a Bluetooth connection.
Is the system connected to another system in
wireless Group Play mode or Stereo Group
mode?
;
Try Bluetooth connection again after
disconnecting the wireless Group Play or
Stereo Group connection.
Are the two Bluetooth devices already
connected?
;
Try Bluetooth connection again after
disconnecting other Bluetooth connections.
The PAIRING button is not working.
Is the system in wireless Group Play mode or
Stereo Group mode?
;
Try again after disconnecting the wireless
Group Play or Stereo Group connection.
I want to switch the HOST (MAIN) system to
the other in wireless Group Play or Stereo
Group connection.
;
Disconnect Group Play mode, press the
Speaker which you want make to HOST
first, and after it use Group LED to judge
instead connect the others one by one.
;
With Stereo Group mode, MAIN
is fixed.
You can not change others as MAIN.
I want to play AUX1 or AUX2 more than 8 hours
without control input.
;
Press and hold the remote control
button for more than 5 seconds in
AUX1
or
AUX2
mode to disable Auto Power Down
Function. Change from
ON-AUTO POWER
DOWN
to
OFF-AUTO POWER DOWN
.
