ENG - 13
Connecting a mobile device via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
LIGHT
PAIRING
TEMPO
USB
AUX
EFFECT
DOWN
UP
EFFECT
DJ
SOUND
MODE
Bluetooth
device
OR
5 Sec
* In battery mode, when the Sound Tower is power off, Bluetooth connection and the party audio app
are not available.
The initial connection
1.
Press and hold the
PAIRING
button on the remote control for more than 5 seconds to enter the
“
BT PAIRING
” mode.
(OR)
Press the
PAIRING
button on the rear panel.
2.
On your device, select “
[AV] MX-ST4B Series
” from the list that appears.
• After the device is connected. The third light on the top panel blinks three times cyan, and the
bluetooth light on the rear panel is steady on.
3.
Play music files from the device connected via Bluetooth through the Sound Tower.
If the device fails to connect
• Sound tower will play voice prompt via bluetooth disconnected.
• If a previously connected Sound Tower listing (e.g. “
[AV] MX-ST4B Series
”) appears in the list, delete
it.
• Then repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
•
BT READY
: In this mode, you can use the previously connected TV or mobile device to connect to
Sound Tower.
•
BT PAIRING
: In this mode, you can connect a new device to the Sound Tower.
(Press and hold the
PAIRING
button on the remote control for more than 5 seconds or press the
PAIRING
button on the rear of the Sound Tower to enter the “
BT PAIRING
” mode.)