Samsung MWR-WE10N, User Manual

Page: 29 / 32

28
1 2 3 5 4
SEG Used
6
How to Set the Additional User Functions
1. If you want to set the detailed settings, press the User Set button.
X You will enter the User Set mode, and the [Main Menu] will be displayed.
2. Refer to the Wired Remote Controller’s User Set list on the next page to select the desired menu.
X Using the [ ∧ ]/[ ∨ ] buttons, select a main menu number and press the [ ＞ ] button to enter the sub-menu setting
screen.
X Using the [ ∧ ]/[ ∨ ] buttons, select a sub-menu number and press the [ ＞ ] button to enter the data setting screen.
X Once you have entered the setting screen, the current setting will be displayed.
X
Refer to the chart for data setting.
X Using the [ ∧ ]/[ ∨ ] buttons, change the settings and press the [ ＞ ] button to move to the next setting.
X
Press the Set button to save the setting and exit to the sub-menu setting screen.
X
Press the Esc button to exit to general mode.
Main menu Sub-menu
• While setting the data, you can use the [ ＞ ]/[ ＜ ] buttons to set the range of SEG used.
• While configuring the setting, press the Esc button to exit to the sub-menu setting screen
without saving the setting.
SETTING ADDITIONAL USER FUNCTIONS
uhzh†~™Œ‹GyŒ”–›ŒGj–•›™–“†t~yT~lXWu†lu†pi†WZ^ZYhTW\U•‹‹GGGY_ YWX\TW[TXWGGG㝘䟸GZaY[aW\