5
EN
G
LIS
H
Wired Remote Controller Installation
Push the two hooks at the same time.
1. Push the two hooks at the bottom of your Wired Remote Controller at the same time, and then pull up the
front cover to separate it from the rear cover.
2. Arrange the power cable and the communication cable so that they fit in the housing along the edges of the
rear cover.
• Insert a flat head screwdriver into the square groove in the upper area of the
hook to disassemble it easily.
<When the cable is not concealed>
<When the cable is concealed>
15cm(6inch)
10cm(4inch)
If you need more space for the
wiring work, you can take it off.
MWR-WE10_E_IM_32811-1.indd 5
2010-12-09 오후 4:41:04
Summary of Contents for MWR-WE10
Page 23: ...ENGLISH 23 Memo ...
Page 24: ......
