7
EN
G
LIS
H
Tracking Your Indoor Unit from the Wired Remote Controller
1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2. If you want to perform tracking again after installation, then press the
Esc
and
Delete
buttons at the same time
for more than five seconds.
The system will reset, and tracking will start again.
3. During tracking, the total number of currently searched indoor units and ventilator(ERV) will be displayed.
• If you want to perform tracking again after installation, then press the Esc and Delete buttons at the same time
for more than five seconds.
• Only the master Wired Remote Controller can display the total number of indoor units and ventilator(ERV).
- Slave Wired Remote Controllers do not display the total number of units.
Displays the total number
of units searched
Indicates tracking
in progress
MWR-WE10_E_IM_32811-1.indd 7
2010-12-09 오후 4:41:04
Summary of Contents for MWR-WE10
Page 23: ...ENGLISH 23 Memo ...
Page 24: ......
