Samsung MWR-SH10N, Operator'S Manual

Page: 15 / 20

ENGLISH-16
Wired remote controller installation/service mode
additional functions of your wired remote controller
• If communication initialization is needed after the setting, the system will reset automatically and
communication will be initialized .
NOtE
Main
menu
Sub
menu
Function description
Setting value
Page Save location
Value Factory default
1
1
Wired remote
controller
setting/
checking (1)
Cooling/Heating selection
0 - Cooling/Heating,
1 - Cooling only
0 01 Wired remote controller
Use of wireless remote controller
for indoor unit
0 - No use, 1 - Use 1 02 Wired remote controller
Master/Slave wired remote
controller
0 - Master, 1 - Slave 0 03 Wired remote controller
Temperature unit
0 - Celsius(°C),
1 - Fahrenheit(°F)
0 04 Wired remote controller
2
Wired remote
controller
setting/
checking (2)
Temperature sensor selection
0 - Indoor unit,
1-Wired remote
controller
0 01 Wired remote controller
Use of average temperature 0 - No use, 1 - Use 0 02 Wired remote controller
Use of Auto mode 0 - No use, 1 - Use 1 03 Wired remote controller
Temperature display
0 - Set temperature
1 - Room
temperature
2 - Relative
temperature 1)*
0 04 Wired remote controller
5
Room
temperature
compensation
2)*
Temperature control reference -9 ~ 40 °C
Current sensor
temperature
01 Wired remote controller
Temperature compensation value -9 .9 ~ 9 .9 °C 0 02,03 Wired remote controller
6
Number of
connected
units
Number of indoor units 0 ~ 16 0 01 None
7
Temperature increment/decrement unit
(°C only)
0 - 1 °C, 1 - 0 .5 °C, 2 -
0 .1 °C
0 01 Wired remote controller
0 Factory option setting
0 - Unchanged,
1 - Factory setting
0 01 None
2
1 Software code Software code None 01~03 None
2 Software version Software version None 01~03 None
4
1
Indoor unit
address/
option setting/
checking 3)*
Target address setting
Target address of
indoor unit (Example
: 20 02 1F)
View master 01~03 None
2 Main address setting/checking
0~4F (in hexadecimal
digits) Main address of
target
01 None
3 RMC address setting/checking 0x00~0xFE 4)*
RMC address of
target
01 None
4 Basic option setting/checking Option code
Basic option
of target
01~20
5)*
None
5 Install option setting/checking Option code
Install option of
target
01~20
5)*
None
6 Install(2) option setting/checking Option code
Install(2) option
of target
01~20
5)*
None
MWR-SH10N_IM_DB68-05567A-01_EN.indd 16 2015/11/19 19:44:13