background image

31

English

ins
tallation

Carefully follow the precautions listed below because 
they are essential to guarantee the safety of both the air 
conditioner and the workers.

•  Always disconnect the air conditioner from the power 

supply before servicing it or accessing its internal 
components. 

•  Verify that installation and testing operations are 

performed by qualified personnel. 

•  Verify that the air conditioner is not installed in an 

easily accessible area. 

General information

•  Carefully read the content of this manual before 

installing the air conditioner and store the manual in a 
safe place in order to be able to use it as reference after 
installation. 

•  For maximum safety, installers should always carefully 

read the following warnings. 

•  Store the operation and installation manual in a safe 

location and remember to hand it over to the new 
owner if the air conditioner is sold or transferred. 

•  This manual explains how to install an indoor unit 

with a split system with two SAMSUNG units. The use 
of other types of units with different control systems 
may damage the units and invalidate the warranty. 
The manufacturer shall not be responsible for damages 
arising from the use of non compliant units. 

•  The manufacturer shall not be responsible for damage 

originating from unauthorised changes or the improper 
connection of electric and requirements set forth in the 
“Operating limits” table, included in the manual, shall 
immediately invalidate the warranty. 

•  The air conditioner should be used only for the 

applications for which it has been designed: the indoor 
unit is not suitable to be installed in areas used for 
laundry. 

•  Do not use the units if damaged. If problems occur, 

switch the unit off and disconnect it from the power 
supply.

•  In order to help prevent electric shocks, fires or injuries, 

always stop the unit, disable the protection switch 
and contact SAMSUNG’s technical support if the unit 
produces smoke, if the power cable is hot or damaged 
or if the unit is very noisy. 

•  Always remember to inspect the unit, electric 

connections, refrigerant tubes and protections regularly. 
These operations should be performed by qualified 

personnel only. 

•  The unit contains moving parts, which should always be 

kept out of the reach of children. 

•  Do not attempt to repair, move, alter or reinstall the 

unit. If performed by unauthorised personnel, these 
operations may cause electric shocks or fires. 

•  Do not place containers with liquids or other objects on 

the unit. 

•  All the materials used for the manufacture and 

packaging of the air conditioner are recyclable. 

•  The packing material and exhaust batteries of the 

remote control (optional) must be disposed of in 
accordance with current laws. 

•  The air conditioner contains a refrigerant that has to be 

disposed of as special waste. At the end of its life cycle, 
the air conditioner must be disposed of in authorised 
centres or returned to the retailer so that it can be 
disposed of correctly and safely.

Installation of the unit

•  IMPORTANT: When installing the unit, always remember 

to connect first the refrigerant tubes, then the electrical 
lines. Always disassemble the electric lines before the 
refrigerant tubes. 

•  Upon receipt, inspect the product to verify that it has 

not been damaged during transport. If the product 
appears damaged, DO NOT INSTALL it and immediately 
report the damage to the carrier or retailer (if the 
installer or the authorised technician has collected the 
material from the retailer.) 

•  After completing the installation, always carry out a 

functional test and provide the instructions on how to 
operate the air conditioner to the user.

•  Do not use the air conditioner in environments with 

hazardous substances or close to equipment that release 
free flames to avoid the occurrence of fires, explosions 
or injuries. 

•  Our units must be installed in compliance with the 

spaces indicated in the installation manual to ensure 
either accessibility from both sides or ability to perform 
routine maintenance and repairs. The units’ components 
must be accessible and that can be disassembled in 
conditions of complete safety either for people or 
things. For this reason, where it is not observed as 
indicated into the Installation Manual, the cost necessary 
to reach and repair the unit (in safety, as required by 
current regulations in force) with slings, 

Safety Information on Installation

Summary of Contents for MV Series





















































Reviews: