10
operation
For a comfortable sleep, the air conditioner will operate in Fall asleep
Sound sleep
Wake up from good’ sleep mode.
1. Press the
button on the remote controller to select the good’ sleep
operation.
indicator appears and off timer indicator starts blinking on the remote
controller display.
2. Press the
button repeatedly to set off time
You can set the time in half hourly units from 30minute ~ 3hours and hourly units
from 3hour ~ 12hours.
The operation hour can be set to minimum 30minutes and maximum 12hours.
Default operation hour is set to 8hours.
3. Press the
Set/Cancel
button to active it.
Off timer indicator stops blinking and set time will be displayed.
If you don’t press Set/Cancel button to start the good’ sleep operation within 10
seconds, the operation is canceled so you should check the Off indicator on the
remote controller display.
1. Fall asleep mode : Provides you with comfortable environment for a good sleep by rapid cooling and hypnagogue
expedition breeze.
2. Sound sleep mode : The sound sleep mode adjust temperature and air flow in wave to maintain healthy skin
temperature while it aids deep sleep. According to the change of good’ sleep operation hours, the
sound sleep hour can be longer or shorter.
3. Wake up from
mode : Provides you with the air flow that adjusts your body temperature to wake you up in
a fresh status.
Temperature and fan speed changes in
mode
You can set the desired temperature by 1˚C(1˚F) within the range of
18˚C~30˚C(65˚F~86˚F).
Fan speed will be adjusted automatically according to the
mode.
Air flow direction will be adjusted automatically according to the
mode.
When the air conditioner is on and in cool mode.
• The recommended set temperature is 25°C~27°C(77°F~81°F) and 26°C(79°F) is the most ideal temperature.
If the set temperature is too low, you may feel cold or dry and catch a cold.
• You may not have such a restful sleep if the
is set too short or long because the default is set to
8-hour-operation.
• If the good’ sleep mode is set less than 4hours, the operation will stop after the set hours. If the
mode
is set over 5 hours, it will run as Wake up stage from the last one hour before it stops automatically.
• If you press Turbo, Mode, Quiet button during the good’ sleep operation, the
operation is canceled
and the selected operation starts.
• Only the latest setting timer will be applied between the On Timer/Off Timer and
off timer functions.
• You can set the S-Plasma ion function during the good’ sleep operation.
NOTE
Press the Set/Cancel button once again.
Cancel
MR-DH00_IB E 33129A(2).indd 10
2011-04-06 오후 2:11:53
