Samsung Mobile WiMAX Outdoor RAS SPI-2331 System Description Download Page 76

Page: 76 / 96

Mobile WiMAX Outdoor RAS SPI-2331 System Description/Ed.02

4-19

Classification

Description

(1)~(5)

This is the procedure to relocate the Authenticator from the S-ACR to the T-ACR,

the T-ACR triggers in order that the MS performs the EAP authentication

procedure with the AAA server again. The T-ACR completes the Authenticator

Relocation procedure by notifying the S-RAS of the authentication result.

(6)~(15)

FA relocation is triggered, and the registration of the PMIP or the CMIP is processed.

(16)~(17)

The S-ACR cancels the S-ACR registration of the MS in the HA.

(18)~(21)

The S-ACR updates the information on interworking with the AAA server and the

final accounting information of MS. Diameter is applied to AAA protocol, S-ACR

performs the session termination procedure.

Summary of Contents for Mobile WiMAX Outdoor RAS SPI-2331

































































































Search results

Summary of Contents for Mobile WiMAX Outdoor RAS SPI-2331

Reviews:

Related manuals for Mobile WiMAX Outdoor RAS SPI-2331

Brands by name

Popular brands

Samsung Mobile WiMAX Outdoor RAS SPI-2331, System Description

Search results

Summary of Contents for Mobile WiMAX Outdoor RAS SPI-2331

Reviews:

Related manuals for Mobile WiMAX Outdoor RAS SPI-2331

Brands by name

Popular brands