Aays treat your cassettes with care; refer, if
necessary, to the section entitled “
Precautions When
Using Audio Cassettes
” on page 24.
Switch the system on by pressing the ( ) button.
Press the TAPE (
) button.
Open the cassette deck by pushing on the corner of the cover
marked the PUSH EJECT (
) button until you hear a click and then
releasing it.
Insert the pre-recorded cassette with the open edge of the tape
facing downwards.
Close the deck by pushing on it until it clicks into place.
To listen to...
Press ...
Side A
TAPE (
) button once.
Side B
TAPE (
) button twice.
Result: The cassette starts playing.
To...
Press ...
Rewind the cassette
/
button.
Fast-forward the cassette
/
button.
When you have finished playback, press the
button.
Your micro component system has three cassette playback
modes which enable you to listen to both sides of a cassette
automatically.
Press the REV.MODE button until the appropriate symbol is
displayed.
When the display indicates...
The micro component system plays
back...
One side of the selected cassette and
then stops.
One side of the cassette.
The other side of the cassette and then
stops.
Both sides of the cassette indefinitely until
you press stop.
1
2
3
4
5
6
7
18
GB
Listening to a Cassette
Selecting the Cassette
Playback Mode
1
2,5
7
7
6
6
MM-ZJ9-GB-RDS 9/25/04 15:19 Page 18