14
13
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
1
Example: Analog signal components such as a VCR, Camcorder, and TV.
Connecting to an External Analog Component
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
CONNECTIONS
Press
AUX
to select AUX.
•
‘
AUX
’ appears in the display.
2
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the
FM 75
Ω
COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM Antenna (supplied)
AM Loop Antenna
(supplied)
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
Connecting to External Components
Connecting the FM, AM Antennas
