14
English
English
15
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
•
Before setting the timer, confirm that the current
time is correct.
•
During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
•
If you no longer want the system to be switched on
or off automatically, cancel the timer by pressing the
TIMER ON/OFF
button.
Example:
You want to wake up to music every morning.
1.
Switch the system on by pressing the
POWER
( )button.
2.
Press the
TIMER CLOCK
button until
TIME
is
displayed.
3.
Press the
ENTER (
)
button.
Result:
ON
is displayed for a few seconds. You
can set the timer switch-on time.
4.
Set the timer switch-on time.
a. Press the
,
or
.
button to set the hours.
b. Press the
ENTER
(
)
button.
Result: The minutes flash.
c. Press the
,
or
.
button to set the minutes.
d. Press the
ENTER
(
)
button.
Result:
OFF
is displayed for a few seconds.
You can now set the timer switch-off
time.
5.
Set the timer switch-off time.
a. Press the
,
or
.
button to set the hours.
b. Press the
ENTER
(
)
button.
Result: The minutes flash.
c. Press the
,
or
.
button to set the minutes.
d. Press the
ENTER
(
)
button.
Result:
VOL XX
is displayed, where
XX
corre-
sponds to the volume already set.
6.
Press the
,
or
.
button to adjust the volume
level, and then press the
ENTER (
)
button.
Result: The source to be selected is displayed.
7.
Press the
,
or
.
button to select the desired
source to be played when the system switches
on.
If you select...
You must also...
FM (radio)
a
Press the
ENTER
(
)
button.
b
Select a preset station by pressing
the
,
or
.
button.
CD/MP3 (compact disc) Load one compact disc.
USB
Connect the USB device.
8.
Press the
ENTER
(
)
button.
Result:
CHKREC
(Do you want to record?) is dis-
played.
9.
Press the
ENTER
(
)
button.
Result:
REC N
is displayed. You can press the
,
or
.
button to select
REC Y
or
REC N
, and
then press
ENTER
(
)
button.
1).
If you select REC N, the Micro Component
will not record when it turns on. If you have
already set a tuner timer recording, selecting
REC N cancels it. Note that the Micro
Component will still turn on and off at the
times you set earlier in this procedure.
2).
If you select the REC Y, you can set the Micro
Component to record when it turns on. The
recording switch on and switch off times can
be different from the timer switch on and off
times you set earlier in this procedure.
a.
Press the ENTER ( ) button.
Result: ON is displayed for a few seconds.
You can set the tuner timer recording
switch-on time.
b.
Press the ENTER (
) button.
Result:
OFF
is displayed for a few
seconds. You can set the tuner timer
recording switch-off time.
•
The maximum tuner timer recording time is 5
hours.
•
If the timer switch on and off times are identical,
the word ERROR is displayed.
•
When there is no disc in or USB connected to
the Micro Component, if you select "MP3/CD"
or "USB", the Micro Component automatically
selects "FM".
•
If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording time is
not applied.
•
If the auto timer is turned on, the MP3/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.
After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
1.
To cancel the timer, press
TIMER ON/OF
F once,
is no longer displayed.
2.
To resum
e the timer, press
TIMER ON/OFF
again.
is displayed again.
•
When you select the TIMER OFF
mode, the
TIMER RECORDING and TIMER function are
not available.
Cancelling the Timer
02875C-MM-J320-XN-ENG-20150701.indd 15
2015/7/20 9:02:41
