10. PortThru (Network Printer Card) Circuit Description
10-1. Introduction
The purpose of the Network Printer Card(PortThru) is to enable the Samsung Printer to function as a network printer.
The PortThru is a plug-in card that plugs into the Samsung Printer. The PortThru provides a Ethernet Local Area
Network interface through which the printer can be connected to the network.
ITEM
Description
Novell Netware
Version 3.x, 4.x, 5.0
MS Windows
Windows 95/98, Windows NT(3.x, 4..x)
Support system
UNIX
AT & T System V(Rel 3.2, Rel 4.2), BSD 4.3 HP-UX(Rel 9.x, Rel 10.x)
SCO 5.x, SUN OS 5.5, SOLARIS 2.5
Macintosh
APPLE
Netware
IPX/SPX, Pserver, Rprint mode, NDS/Bindery
Windows
IPX/SPX, TCP/IP, DLC/LLC
Support protocols UNIX
TCP/IP
APPLE
EtherTalk Phase 2
Network Management SNMP MIB-II, Private MIB
CPU
32bit RISC controller
Hardware
Flash memory
1M byte
RAM
64 Kbyte SRAM / 8M byte DRAM
Interface with
Shared memory
64K byte SRAM
Printer
Logical connection
IEEE 802.2 802.3
Attachment
10/100Base-Tx
CPU
Samsung NetARM, 33MHz
PHY Chip
ICS1892, 25MHz
Flash ROM
1M Byte
Memory
DRAM
8M Byte
SRAM
64K Byte
EEPROM 32K
Bit
Printer Interface
NetBridge, 33MHz
60 Pin Connector
Dimension(HxWxD)
15 x 80 x 124mm
Power Consumption
Max. 0.6A/ +5Vdc
Product Information
Samsung Electronics
10-1
Summary of Contents for ML 7000
