Product Information
Samsung Electronics
10-8
PHY Chip Error
U165's input
voltage = +5V
U165(pin no. 82)'s
Reset input level = High ?
U165(pin no. 53)'s
input clock = 25MHz ?
U165(pin no. 36 and 43)'s
input clock = 2.5MHz or 25MHz ?
Check the Network Board
Solering status ?
Check the RA1, RA10, R138, R144
and R145
Check the LAN Cable
Replace the board
If you can't repair the board
PHY Chip Error
Check the filter (L1, L2)
No
Yes
Yes
Yes
Yes
No
No
Check the Y2, R97 and R105
No
Check the Y2, R97 and R105 and
check the soldering status of U165
Check the connector J1's pin no. 39
Check the U22's pin no. 123
Check the U22's pin no. 75
Reset signal :
Nomally High during operation
Summary of Contents for ML 7000
