Samsung ME65B User Manual Download

Page: 83 / 222

Using MDC

3 Using MDC

Alert

Fault Device

This menu shows a list of display devices which have following errors - fan error, temperature

error, brightness sensor error, or lamp error.

Select a display device from the list. The

Repair

button will be enabled. Click the refresh button

to refresh the error status of the display device. The recovered display device will disappear

from the

Fault Device List

Fault Device Alert

Display device in which error is detected will be reported by email.

Fill in all required fields. The

Test

and

buttons will be enabled. Ensure the

Sender

information and at least one

Recipient

are entered.

Summary of Contents for ME65B































































































































































































































Search results

Summary of Contents for ME65B

Reviews:

Related manuals for ME65B

Brands by name

Popular brands

Samsung ME65B, User Manual

Search results

Summary of Contents for ME65B

Reviews:

Related manuals for ME65B

Brands by name

Popular brands