Samsung ME65B User Manual Download Page 121

Page: 121 / 222

121

5 Sound Adjustment

Sound Adjustment

Configure the sound (

Sound

) settings for the product.

5.1

Sound Mode

[

]

Sound

Sound Mode

ENTER

[

]

Use the up and down arrow keys to select an option, and then press [

Standard

: Selects the normal sound mode.

Music

: Emphasizes music over voices.

Movie

: Provides the best sound for movies.

Clear Voice

: Emphasizes voices over other sounds.

Amplify

: Increase the intensity of high-frequency sound to allow a better listening experience for the

hearing impaired.

Speaker Select

is set to

External

Sound Mode

is disabled.

The displayed image may differ depending on the model.

Sound

Sound Mode

Sound Effect

3D Audio

Broadcast Audio Options

Speacker Settings

Reset Sound

Standard

Low

Summary of Contents for ME65B































































































































































































































Search results

Summary of Contents for ME65B

Reviews:

Brands by name

Popular brands

Samsung ME65B, User Manual

Search results

Summary of Contents for ME65B

Reviews:

Brands by name

Popular brands