English - 15
04
O
VEN USE
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the page
40-41
.
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
Press the
Start/+30s
button and set the time to 4 or 5 minutes,
by pressing the
Start/+30s
button the appropriate number of
times.
Result:
The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “88:88” and then
“12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
1.
Press the
Clock
button.
2.
Press the
Up
or
Down
button to set time display type (12H
or 24H). At that time, press the
Select
button to set the
display type.
3.
Press the
Up
or
Down
button to set the hour.
4.
Press the
Select
button.
5.
Press the
Up
or
Down
button to set the minute.
6.
When the right time is displayed, press the
Select
button to
start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
MC28H5015AK_EG_DE68-04234V-00_EN.indd 15
2014-07-22 �� 1:44:29
