GB
8
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM
antenna terminal.
Plug the connector on the
FM
aerial supplied into the coaxial socket
(75
Ω
) marked
FM
on the rear of the system.
Follow the instructions given on
Page 14
to tune into a radio sta-
tion, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
FM
aerial to the
FM
socket on the rear
of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
FM
FM
FM AERIAL
(supplied)
75
Ω
COAXIAL CABLE
(not supplied)
AM ANT.
FM ANT. (75
Ω
)
DIGITAL OUT
OPTICAL
Connecting the AM(MW)/LW Aerial
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM
aerial connector terminals are located on the rear of the system and
are marked
AM
.
To avoid noise interference, check that the loudspeaker wires do
not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
