GB
10
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice versa.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result:
CLOCK
is displayed.
Press Manual EQ/Enter.
Result: The hour flashes.
To...
Turn the Moving Jog knob to the...
Increase the hours
Right
Decrease the hours
Left
When the correct hour is displayed, press Manual EQ/Enter.
Result: The minutes flash.
To...
Turn the Moving Jog knob to the...
Increase the minutes
Right
Decrease the minutes
Left
When the correct time is displayed, press Manual EQ/Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another function,
by pressing
Timer/Clock
once.
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “
Precautions When Using Compact Discs
” on
page 25
.
Switch the system on by pressing On/Standby.
Press the Open/Close button on the front panel.
Result: The compartment opens.
Place one or two discs in the front slots of the carrousel, with the label
on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to load a third compact disc, press the Disc Change but-
ton on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
Close the compartment by pressing the Open/Close button again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Press...
Disc 1
CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it,
to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Setting the Clock
1
2
3
4
5
6
7
Game
Demo
PTY
Display
Timer/
Clock
Rev Mode
Deck 1/2
Counter Reset
Normal
CD REC/Pause
High
Dubbing
Mono/ST
Preset/Memory
REC/Pause
Program
TAPE
Volu
CD
TUNER
Band
CD Repeat
Shuffle
CD Synchro
Aux
On/Standby
+
–
RDS
Preset/Manual
Manual EQ /Enter
Moving Control
Up
Down
2
Loading and Changing Compact
Discs
1
2
3
4
5
6
Disc 1
Disc 2
Disc 3
Disc Change
Open/
Close
Game
Demo
PTY
Display
Timer/
Clock
TAPE
Volume
CD
TUNER
Band
ower
Surround
Aux
On/Standby
+
–
RDS
Manual EQ /Enter
Moving Control
CD
Open/
Close
Disc 1
Disc 2
Disc 3
1
1
3,5,7
4,6
2,5
4
5
5