background image

GB

23

The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.

Safety Precautions

Ambient operating conditions:
Ambient temperature

5°C-35°C

Humidity

10-75%

Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.

Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.

During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to light-
ning could damage the unit.

VOLUME  

UP  

DOWN

Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.

When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.

Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.

Do not remove any equipment panels.
The inside of the unit 
contains live components, which
cause electric shock.

To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:

The outer casing

The compact disc player

The cassette players (heads, rollers and drive capstans)

Always unplug the system from the wall outlet:

Before cleaning it

If you are not going to be using it for a long time

Outer Casing

Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.

Compact Disc Player

Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.

Regularly clean the player with a special cleaning disc (available from
your local dealer).

Tape Decks

Press 

PUSH EJECT

(

) to open the cassette deck.

Use a cotton bud and a special cassette cleaning agent to clean the:

Head (1)
Rollers (2)
Drive capstans (3)

If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.

Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).

If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.

Cleaning Your Mini-Compact
System

1

1

2

2

3

2

1

22

You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
must have a 3.5

ø

jack or an appropriate adapter.

Connect the headphones to the 

PHONES

jack on the front panel.

Result: The loudspeakers are no longer used to output the sound.

Prolonged use of headphones at a high volume may damage
your hearing.

Connecting Headphones

While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: 

You wish to go to sleep to music.

Press 

AI SLEEP

.

Result: playback starts and the following indications are displayed:

Press 

AI SLEEP

once or more times to indicate how long the 

system should continue playing before it switches off:

At any time, you can:

Check the remaining time by pressing 

AI SLEEP

Change the remaining time by repeating Steps 

1

and 

2

Press 

AI SLEEP

once or more times until 

AI SLEEP 

is displayed.

Result: The system will automatically switch off at the end of the disc

or cassette.

To cancel SLEEP function, press 

AI SLEEP

once or more times until

OFF

is display.

Setting the System to Switch off
Automatically

1

2

3

4

90 MIN 

CD SYNCHRO

CD/MP3-CD

AI SLEEP

PROGRAM/SET

MEDLEY

VOLUME

DISC SKIP

SHUFFLE

CD REPEAT

TUNING/

Microphone Function(option)

The microphone enables the user to mix in his or her vocals
to sing-along with the music or recording .

Preparation
Plug the microphone with two 6.3mm mic jacks into microphone terminal.

Turn the 

MIC LEVEL

knob to adjust the 

MIC

volume.                    

Press the 

ECHO

button to  select ECHO1,ECHO2, and ECHO OFF.

1
2

2

1

CD SYNCHRO

Summary of Contents for MAX-C670T















Reviews: