background image

2-11

2. Product specifications

 

„

Switching between  Devices

1. 

Press the TOOLS button, then select 

(HDMI-CEC)

.

2. 

devices connected to the TV are listed in Device List.

 

N

 If you cannot find a device you want, press the 

A

 button to refresh the list.

3.  Select a device and press the ENTERE

E

 button. You can switch to the selected device.

 

Only when you set 

(HDMI-CEC)

 to 

On

 in the 

System

 menu, the 

Device List

 menu appears.

  

●  

Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the

 

      switching operation.

 

 

●  

If you have selected external input mode by pressing the 

SOURCE

 button, you cannot use the 

 

      function. Make sure to switch to an  device by using the 

Device List

.

 

„

Recording

You can make a recording of a TV Programme using a Samsung recorder.

1. 

Select 

Recording

.

 

N

 When there are more than two recording devices

  

●  

When multiple recording devices are connected, the recording devices are listed. Select one recording

 

      device in the 

Device List.

  

●  

When the recording device is not displayed, select 

Device List

 and press the 

A

 button to searchdevices.

2. 

Press the 

EXIT

 button to exit.

 

You can record the source streams by selecting 

Recording:

 (device_name).

 

Pressing the 

(REC) button will record whatever you are currently watching. If you are watching video from

 

  another device, the video from the device is recorded.

 

Before recording, check whether the antenna jack is properly connected to the recording device. To properly

 

  connect an antenna to a recording device, refer to the recording device’s users manual.

 

„

Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.

1. 

Select 

Receiver

 and set to 

On

2. 

Press the 

EXIT

 button to exit.

 

If your receiver supports audio only, it may not appear in the device list.

 

The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL

 

  AUDIO OUT (OPTICAL) jack of the TV.

 

N

 When the receiver (i.e Home Theatre) is set to 

On

, you can hear sound output from the TV’s Optical jack.

 

  When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When

 

  the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound

 

  will be heard from the receiver.

N  

NOTE

 

● 

You can only control  devices using the TV remote control, not the buttons on the TV.

 

● 

The TV remote control may not work under certain conditions. If this occurs, reselect the  device.

 

● 

The  functions do not operate with other manufacturers’ products.

Summary of Contents for LT20A350













































































Reviews: