English - 12
Turning the TV On and Off
Press the
POWER
button on the remote control.
You can also use the
POWER
button on the TV.
Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the
POWER
button on the remote control.
The message “Menu Language, Store Demo, Channels and Time will be set.”
is displayed.
Press the
ENTER
button, then “Select language of the OSD.” menu
is automatically displayed. Press the
ENTER
button.
2.
Press the ▲ or ▼ button to select language, then press the
ENTER
button. The message “Select ‘Home Use’ when installing this TV in your
home.” is displayed.
3.
Press the ◄ or ► button to select “
Store Demo” or “Home Use”, then
press the
ENTER
button. The message “Select the Antenna source to
memorize.” is displayed.
We recommend setting the TV to “Home Use” mode for the best picture in
your home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return
to “Home Use” (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the
MENU
button on the TV for
5 seconds.
4.
Press the ▲ or ▼ button to memorize the channels of the selected
connection. Press the
ENTER
button to select “Start”.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
In Cable mode, you can select the correct signal source among STD,
HRC and IRC by pressing the ▲, ▼, ◄ or ► button, then press the
ENTER
button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5.
The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the
ENTER
button with
“Stop” selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). And then, the Auto program menu reappears.
Press the
ENTER
button when channel memorization is complete.
The message “Set the Clock Mode.” is displayed.
6.
Press the
ENTER
button.
Press the ▲ or ▼ button to select “Auto”, then Press the
ENTER
button.
The message “Set to daylight saving time.” is displayed.
If you select “Manual”, “Set current date and time” is displayed.
(See page 45)
7.
Press the ▲ or ▼ button to select “Off” or “On”, then press the
ENTER
button. The message “Select the time zone in which you live.” is displayed.
➣
➣
➣
➣
➣
➣
Plug & Play
Select ‘Home Use’ when installing this TV in your
home.
Home Use
Store Demo
Enter
Move
Plug & Play
Set the Clock Mode.
Clock Mode
: Auto
Auto
Manual
Skip
Enter
Move
Plug & Play
Select Language of the OSD.
Menu Language
: English
Enter
Move
English
Español
Français
Plug & Play
Auto Program in Progress.
Stop
Air 38
3%
DTV Air : --
Air : --
Skip
Enter
Plug & Play
Auto Program is completed.
3 channels are memorized.
DTV Air
: 1
Air
: 2
OK
Skip
Enter
Plug & Play
Set to daylight saving time.
DST
: Auto
Off
On
Skip
Enter
Move
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Skip
Enter
Move
Start
Start
Plug & Play
Menu Language, Store Demo, Channels and Time will
be set.
OK
Enter
BN68-01796A-00Eng.indd 12
2008-07-29 �� 4:43:10
