17
English
03
Basic Featur
es
speaker select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to
External speaker
.
When
✎
speaker select
is set to
External speaker
, the
volume and
MUTE
buttons will not operate and the
sound settings will be limited.
When
✎
speaker select
is set to
External speaker
, you
should use these settings.
TV speaker: Off, External speaker: On
x
When
✎
speaker select
is set to
TV speaker
, you
should use these settings.
TV speaker: On, External speaker: On
x
If there is no video signal, both speakers will be mute.
✎
sPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format:
■
During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options
PCM
or
Dolby Digital
.
By connecting to 5.1ch speakers in a dolby
✎
digital setup, maximize your interactive 3D sound
experience.
Audio Delay
■
: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset
Reset all sound settings to the factory defaults.
Setup Menu
setting the Time
¦
MEnU
O
m
→
setup
→
Time
→
EnTER
E
Time
The current time will appear every time you press the
✎
InFO
button.
Clock
■
: Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
✎
the clock again.
Clock Mode
: Set up the current time manually or
automatically.
Auto
–
: Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
✎
the time automatically.
Manual
–
: Set the current time manually.
Depending on the broadcast station and signal,
✎
the auto time set up may not be correct. In this
case, set the time manually.
Clock set
: Set the
Month
,
Day
,
Year
,
hour
,
Minute
and
am/pm
.
Available only when
✎
Clock Mode
is set to
Manual
.
You can set the month, day, year, hour and minute
✎
directly by pressing the number buttons on the
remote control.
DsT (Off / On)
: Switches the DST(Daylight Saving Time)
function on or off.
This function is only available when the
✎
Clock
Mode
is set to
Auto
.
Time Zone
: Select your time zone.
This function is only available when the
✎
Clock
Mode
is set to
Auto
.
Using the sleep Timer
¦
MEnU
O
m
→
setup
→
Time
→
sleep Timer
→
EnTER
E
sleep Timer
■
t
: Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the
✎
sleep Timer
, select
Off
.
setting the On/Off Time
¦
MEnU
O
m
→
setup
→
Time
→
Timer 1
→
EnTER
E
Timer 1 / Timer 2 / Timer 3
■
: Three different on / off
timer settings can be made. You must set the clock first.
MEDIA.P
P
POWER
P.MODE
S.MODE
SLEEP
Timer 1
L
Move
U
Adjust
E
Enter
R
Return
On Time
Off Time
Volume
Source
Antenna
Channel
Repeat
Sun Mon Tue Wed Thu Fri
Sat
Inactivate
12
00
am
Inactivate
12
00
am
10
TV
Air
3
Once
▲
▼
BN68-02663B_Eng.indb 17
2010-06-30 �� 2:39:33
