English - 14
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the
POWER
P
button on the remote control.
You can also use the
POWER
P
button on the TV.
The message
Select Language of the OSD.
is displayed.
2.
Press the ▲ or ▼ button to select the language, then press the
ENTER
E
button. The
message
Select ‘Home Use’ when installing this TV in your home.
is displayed.
.
Press the ◄ or ► button to select
Store Demo
or
Home Use
, then press the
ENTER
E
button. The message
Select the
Antenna source to memorize.
is displayed.
We recommend setting the TV to
Home Use
mode for the best picture in your home environment.
Store Demo
mode is only intended for use in retail environments. If the unit is accidentally set to
Store Demo
mode and
you want to return to
Home Use
(Standard): Press the volume button on the TV. When the volume OSD is displayed,
press and hold the
MENU
button on the TV for 5 seconds.
4.
Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the
ENTER
E
button to select
Start
.
Air: Air
antenna signal. /
Cable: Cable
antenna signal. /
Auto: Air
and
Cable
antenna signals.
In Cable mode, you can select the correct signal source among
STD, HRC
, and
IRC
by pressing the ▲, ▼, ◄ or ►
button, then press the
ENTER
E
button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
.
Press the
ENTER
E
button to select
Start
. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the
ENTER
E
button with
Stop
selected.
After all the available channels are stored, it starts to remove scrambled channels. The
Auto program
menu then
reappears. Press the
ENTER
E
button when channel memorization is complete. The message
Set the Clock Mode.
is
displayed.
6.
Press the
ENTER
E
button.
Press the ▲ or ▼ button to select
Auto
, then Press the
ENTER
E
button. The message
Set to daylight saving time.
is
displayed. If you select
Manual, Set current date and time
is displayed.
7.
Press the ▲ or ▼ button to select
Off, On
or
Auto
, then press the
ENTER
E
button.
8.
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the
ENTER
E
button. If you have received a
digital signal, the time will be set automatically. If not, see page 22 to set the clock.
.
The connection method to provide the best quality HD is offered. After confirming the method, press the
ENTER
E
button.
10.
The message
Enjoy your watching.
is displayed. When you have finished, press the
ENTER
E
button.
If you want to reset this feature...
1.
Press the
MENU
button to display the menu. Press the ▲ or ▼ button to select
Setup
, then press the
ENTER
E
button.
2.
Press the
ENTER
E
button again to select
Plug & Play
.
The
Plug & Play
feature is only available in the TV mode.
¦
N
N
N
N
N
N
N
N
N
Plug & Play
Select Language of the OSD.
Menu Language
: English
►
E
Enter
BN68-01883C-00L02.indb 14
2009-07-28 ¿ÀÈÄ 3:45:48
