Samsung LED 8000 series, User Manual

Page: 16 / 609

English - 16
Configuring the Basic Settings in Initial Setup
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the
P
button to
turn on the TV.
✎
Use the standard remote to run the Initial Setup.
✎
Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 24).
✎
To return to the previous step in the Setup sequence, select Previous .
✎
If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
or cable connection before you turn on the TV. See page 12 for instructions.
✎
If you want to configure a wired network connection during Setup , make sure you've connected a
LAN cable to your TV. See pages 35 for instructions. If you want to configure a wireless network
connection during
Setup , make sure your wireless modem or router is on and working.
1 Menu Language :
Select a Language.
After you press the
P
button, the Start screen appears. Select Next
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select
Next . The TV will
display on-screen menus using the language you select beginning with
the next step in the
Setup process.
2 Use Mode : Select
the Home Use
Mode.
On the Use Mode screen, select the Home Use using your remote, and
then select Next . The Network Settings screen appears.
✎
Store Demo is for retail environments only. If you select Store
Demo , some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about
Store Demo , go to the end of this section.
3 Network Settings :
Configure the
network settings
✎
To configure
later, select
Skip .
You can set up
the network
connection later
using the on-
screen
Network
menu.
To configure your network settings, select Start using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page.
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select
Skip , and
then go to 6 - Auto Program (1) on page 18.
To configure network settings later, refer to “Setting up the Wired or
Wireless Network” in the e-Manual or see the Network Connection
sections in this manual (pages 34 and 36).