Samsung LED 6500 series Page 44 User Manual Download

Page: 44 / 325

◀

▶

English

◀

NOTE

●

Your TV lists all available channels, both Added and deleted, on the

All Channels

menu.

●

A gray-colored channel indicates the channel has been deleted.

●

Add

only appears if you have selected a deleted channel on the

All Channel

list.

●

Delete

only appears if you have selected an Added channel on the

Added Ch.

All Channels

list.

●

You can also delete a channel on the

All Channels

list. Added channels

are bright. Deleted channels are dim. To delete an

Added

channel on

the

All Channels

list, select a bright channel, press the

TOOLS

button,

select

Delete

, press

ENTER

, then press

ENTER

again.

Summary of Contents for LED 6500 series






































































































































































































































































































































Search results

Summary of Contents for LED 6500 series

Reviews:

Related manuals for LED 6500 series

Brands by name

Popular brands

Samsung LED 6500 series, User Manual

Search results

Summary of Contents for LED 6500 series

Reviews:

Related manuals for LED 6500 series

Brands by name

Popular brands