manualshive.com logo in svg

Samsung LED 6500 series, User Manual

Share
Download
Samsung LED 6500 series User Manual Download Page 95

▶ ◀

▶

English

 

N

If the connection process fails, check the 
LAN port connection.

 

N

If the automatic process cannot find the 
network connection values or if you want to 
set the connection manually, go to the next 
secton, 

Manual Network Setup

.

 

●

The displayed image may differ depending on the 
model.

Network Setting

Wired network and Internet connection completed.

Internet is connected successfully.

If you have a problem with using Internet Service, contact your Internet service 

provider.

MAC Address 

00:12:fb:2b:56:4d

IP Address 

192.168.11.4

Subnet Mask 

255.255.255.0

Gareway 

192.168.11.1

DNS Server 

192.168.11.1

IP Setting

OK

SEC_LinkShare

6/6

Summary of Contents for LED 6500 series






































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands