english -
listening through a receiver
You can listen to sound through a receiver instead of the tV speaker.
1.
Press the
toolS
button. Then Press the
enter
button to select "(HDMI-
CEC)".
Press the ▲ or ▼ button to select "Receiver", then press the
enter
button.
.
Press the ◄ or ► button to select to "On", then press the
enter
button.
Now you can listen to sound through the receiver.
.
Press the
eXIt
button to exit.
When the receiver is set to On, you can listen to the TV sound through the 2-channel
receiver.
If the receiver is exclusively for a home theatre only (supporting audio only), it may not
appear in the device list.
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
In case of a content with copyright problem, listening through the receiver may not properly operate.
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power
failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page
21
)
➣
➣
➣
➣
➣
Check Points before requesting Service
Symptom
Solution
does not work.
■ Check if the device is an device. The system supports devices only.
■ Connect only one receiver.
■ Check if the device power cord is properly connected.
■ Check the device’s Video/Audio/HDMI 1.3 cable connections.
■ Check whether (HDMI-CEC) is set to On in the setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is exclusive remote control.
■ doesn’t work at a certain condition. (Searching channels, Operating WISELINK, Plug & Play,
etc.)
■ When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or
restart your TV.
■ Check if the Function of device is set on.
I want to start .
■ Check if the device is properly connected to the TV and check if the (HDMI-CEC) is
set to On in the Setup menu.
■ Press the
tV/DtV
button on the TV remote control to switch to TV. Then press the
toolS
button to
show the menu and select a menu you want.
I want to exit .
■ Select
View tV
in menu.
■ Press the
SourCe
button on the TV remote control and select a device other than devices.
■ Press any of
P
/
and
Pre-Ch
such to change to the TV mode. (Note that the channel button
operates only when a tuner-embedded device is not connected.)
the Configuring
connection message appears
on the screen.
■ You cannot use the remote control when you are configuring or switching to a view mode.
■ Use the remote control when the setting or switching to view mode is complete.
the device does
not play.
You cannot use the play function when Plug & Play is in progress.
the connected device is not
displayed.
■ Check whether or not the device supports functions.
■ Check whether or not the HDMI 1.3 cable is properly connected.
■ Check whether (HDMI-CEC) is set to On in the setup menu.
■ Search devices again.
■ You can connect an device using the HDMI 1.3 cable only. Some HDMI cables may not
support functions.
■ If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3 cable or power cord
or a power failure, please repeat the device scan.
the tV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
the tV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
View tV
Select Device
record
menu on Device
Device operation
receiver
:off
Setup
tV
P
move
enter
return
BN68-01625A-01Eng.indd 54
2008-08-19 �� 9:40:07
