English - 17
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are
recommended.
D-Sub and HDMI/DVI Input
Mode
resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
31.469
70.086
25.175
+/-
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
35.000
66.667
30.240
-/-
832 x 624
49.726
74.551
57.284
-/-
VeSA CVT
720 x 576
35.910
59.950
32.750
-/+
1280 x 720
44.772
59.855
74.500
-/+
1280 x 720
56.456
74.777
95.750
-/+
VeSA DMT
640 x 480
31.469
59.940
25.175
-/-
640 x 480
37.500
75.000
31.500
-/-
640 x 480
37.861
72.809
31.500
-/-
800 x 600
37.879
60.317
40.000
+/+
800 x 600
46.875
75.000
49.500
+/+
800 x 600
48.077
72.188
50.000
+/+
1024 x 768
48.363
60.004
65.000
-/-
1024 x 768
56.476
70.069
75.000
-/-
1024 x 768
60.023
75.029
78.750
+/+
1360 x 768
47.712
60.015
85.500
+/+
VeSA GTF
1280 x 720
52.500
70.000
89.040
-/+
When using an HdMI/dvI cable connection, you must use the
N
HDMI (DVI)
jack.
The interlace mode is not supported.
N
The set might operate abnormally if a non-standard video format is selected.
N
Separate and Composite modes are supported. SOG is not supported.
N
Setting up the TV with your PC
¦
Preset
N
: Press the
SOURCE
button to select PC mode.
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
This function does not work in dvI-HdMI mode.
N
Press the
T
TOOLS
button to display the
Tools
menu. You can also set the Auto Adjustment
by selecting
Tools → Auto Adjustment
.
Screen
❑
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (
Coarse
) and Fine-tune again. After the noise has
been reduced, readjust the picture so that it is aligned on the centre of screen.
PC Position
Adjust the PC’s screen positioning if it does not fit the Tv screen. Press the ▲ or ▼ button to adjusting the vertical-Position. Press
the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Brightness :
: 45
Sharpness
: 50
Auto Adjustment
►
Screen
Advanced Settings
Picture Options
Picture reset
Picture
BN68-03043A.indb 17
2010-04-14 �� 4:56:28
